Monitoring of soil biochemical quality parameters under greenhouse spinach cultivation through animal waste recycling

Under the intensive agricultural system, direct application of animal slurries to soils can provide a sustainable disposal of these wastes by inducing positive changes in soil quality and fertility. However, how animal wastes quantitatively affect the key nutrients (C, N, P and S) transforming soil enzymes is not clearly known. A greenhouse spinach cultivation study demonstrated that pig slurry, either in raw (RS) or processed (aerobically aged) (PS) form, significantly (p?β-glucosidase (23–39%), urease (59–103%), nitrate reductase (73–103%) and dehydrogenase (27–72%)) and microbial growth in soil as compared to the unamended control. However, it did not significantly (p?>?.05) alter the aryl sulphatase enzyme activity. Slurry applications also significantly improved the macro (N, P and K) and micronutrients (Cu, Mn, Zn and Fe) uptake by spinach plant and hence the yield (2.9–3.38 times higher than control). Similarly, compared to chemical fertilisers the application of pig slurries improved soil biological and biochemical parameters as well as plant nutrients uptake. This study demonstrated the closing of global energy and nutrient cycles through land application of animal wastes without compromising the crop yield.     

Design and use of group-specific primers and probes for real-time quantitative PCR

Real-time quantitative polymerase chain reaction (qPCR) has gained popularity as a technique to detect and quantify a specific group of target microorganisms from various environmental samples including soil, water, sediments, and sludge. Although qPCR is a very useful technique for nucleic acid quantification, accurately quantifying the target microbial group strongly depends on the quality of the primer and probe used. Many aspects of conducting qPCR assays have become increasingly routine and automated; however, one of the most important aspects, designing and selecting primer and probe sets, is often a somewhat arcane process. In many cases, failed or non-specific amplification can be attributed to improperly designed primer-probe sets. This paper is intended to provide guidelines and general principles for designing group-specific primers and probes for qPCR assays. We demonstrate the effectiveness of these guidelines by reviewing the use of qPCR to study anaerobic processes and biologic nutrient removal processes. qPCR assays using group-specific primers and probes designed with this method, have been used to successfully quantify 16S ribosomal Ribonucleic Acid (16S rRNA) gene copy numbers from target methanogenic and ammonia-oxidizing bacteria in various laboratory- and full-scale biologic processes. Researchers with a good command of primer and probe design can use qPCR as a valuable tool to study biodiversity and to develop more efficient control strategies for biologic processes.     

Efficacy of rapeseed residue and eggshell waste on enzyme activity and soil quality in rice paddy

Addition of plant residue into soils improves soil physiochemical properties and its fertility. Rapeseed residue is an emerging N source to paddy soils via rice-rape double-cropping practice. The objective of this study was to evaluate the effects of rapeseed residue and eggshell waste on chemical changes and enzyme activity in the rice paddy soil. The powdered eggshells at 0, 1, 3, and 5% were applied once to 7.0 kg paddy repacked soils in each pot treated with the rapeseed residue or the conventional N, P, and K fertilisers. Eight rice seedlings (Oriza sativa L. cv. Ilmibyeo) (40 days after sowing) were transplanted to the treated each pot. The contents of total C (TC) and N (TN), and organic matter (OM) were significantly increased in soils treated with the rapeseed residue compared to the N, P, and K fertilisers. With the addition of eggshell containing ～92% CaCO₃, a considerable increase of soil pH was observed in soils treated with the rapeseed residue and the N, P, and K fertilisers, compared to the untreated soil. Activities of β-glucosidase, urease, and arylsulfatase enzymes were higher in soils treated with the rapeseed residue than soils treated with the N, P, and K fertilisers. The eggshell additions at 1, 3, and 5% into soils treated with the rapeseed residue increased enzyme activity mainly resulting from N mineralisation, whereas no change in enzyme activity was observed in the soils treated with the NPK fertiliser. The combined use of the rapeseed residue and the eggshells can be beneficial to improve soil environment.     

Improving vulnerability assessment towards Integrated Coastal Zone Management (ICZM): a case study of small islands in Indonesia

Vulnerability assessment is one of the methods currently being used to measure the ocean and coastal sustainability in order to enable better evaluation and redesign of land-based development and policy-making. Because of different geological and geographical formations, the elements that comprise the vulnerability indicators are different from each other, and there are various vulnerability equations that have been used. At the present time, there are no unified vulnerability indicators that can be applied universally to every country. The Seribu Islands, Indonesia, also known in English as the Thousand Islands, consisting of 105 islands located to the north of Jakarta, have been chosen as a study area for vulnerability assessment according to the basic principles of Integrated Coastal Zone Management theory. The results indicate that in practice, Indonesian Integrated Coastal Zone Management legal systems do exist and that in some cases, part of the responsibility for the problems rests with legislation that imposes complex systems of administration, unrealistic sanctions and impractical solutions. This research also shows that inter-sectoral, inter-governance and spatial developments are the three components that need to be improved for the successful implementation of Integrated Coastal Zone Management in the region.     

The role of black carbon as a catalyst for environmental redox transformation

Black carbon (BC) is an important class of geosorbents that control the fate and transport of organic pollutants in soil and sediment. We previously demonstrated a new role of BC as an electron transfer mediator in the abiotic reduction of nitroaromatic and nitramine compounds by Oh and Chiu (Environ Sci Technol 43:6983–6988, 2009). We proposed that BC can catalyze the reduction of nitro compounds because it contains microscopic graphitic (graphene) domains, which facilitate both sorption and electron transfer. In this study, we assessed the ability of different types of BC—graphite, activated carbon, and diesel soot—to mediate the reduction of 2,4-dinitrotoluene (DNT) and 2,4-dibromophenol (DBP) by H₂S. All three types of BC enhanced DNT and DBP reduction. H₂S supported BC-mediated reduction, as was observed previously with a thiol reductant. The results suggest that BC may influence the fate of organic pollutants in reducing subsurface environments through redox transformation in addition to sorption.     

Selenium extractability from a contaminated fine soil fraction: implication on soil cleanup

Two batches of fine soil fraction of an acidic soil were deliberately contaminated with selenite (Se(IV)) and selenate (Se(VI)), respectively, and aged for more than 220 days. Speciation analysis using continuous flow-through hydride generation atomic absorption spectrometry (HGAAS) indicated that the species were predominant in their respective aged soils. A selective sequential extraction scheme was employed to fractionate the Se retained in the soils into six fractions of varying retentions. Abilities of various chemical reagents in extracting the Se in the two soil batches were then evaluated. The reagents investigated were sodium salts such as sodium chloride (NaCl), sodium sulfate (Na2SO4), sodium carbonate (Na2CO3), and sodium phosphate (Na3PO4), and two oxidants, namely, hydrogen peroxide (H2O2) and potassium permanganate (KMnO4). It was found that NaCl, Na2SO4, and Na2CO3 could only extract the exchangeable fraction of Se, while Na3PO4 could extract the exchangeable and strongly-bound fractions. Selenate was extracted more than Se(IV) by the salts. The kinetics of Se(IV) extraction by Na3PO4 could be best described by the Elovich model, while the Ritchie second-order model was the most appropriate to describe Se(VI) extraction. Efficiencies of the oxidants in Se(IV) extraction highly depended on their applied dosages. Both H2O2 and KMnO4 were able to extract greater than 93% of total Se, and therefore were significantly more effective than the salts in Se(IV) extraction.     

Effects of the simultaneous application of potassium and calcium on the soil-to-Chinese cabbage transfer of radiocesium and radiostrontium

Pot experiments were carried out in a greenhouse to investigate how effectively the transfer of radiocesium and radiostrontium from soil to Chinese cabbage could be reduced by applying K and Ca simultaneously to the soil. The sources of these elements were KCl and Ca(OH)(2) at agrochemical grades. Varying dosages of K and Ca were tested for an acid loamy soil treated with a mixed solution of (137)Cs and (85)Sr at two different times - 3 d before sowing and 32 d after sowing. For the pre-sowing deposition, the soil-to-plant transfer of (137)Cs decreased sharply with increasing dosages of K and Ca (K/Ca, g m(-2)) from 4.8/46 up to 22.4/215 but the (85)Sr transfer had the greatest reduction at a dosage of 12.8/123. At this dosage, an about 60% reduction occurred for each radionuclide. Plant growth was inhibited from the dosage of 22.4/215, above which all the plants died young. Both dosages of 4.8/46 and 12.8/123 tested following the growing-time deposition produced around 95% reductions for (137)Cs and 50% reductions for (85)Sr. In the second year after the 12.8/123 applications, the effects for (85)Sr were almost the same as in the first year, whereas those for (137)Cs were diminished slightly for the pre-sowing deposition and markedly for the growing-time deposition. Considerably (K) or slightly (Ca) higher doses than 12.8/123 would be allowable for the maximum TF reductions achievable without a growth inhibition.     

Predictive model for the (14)C radioactivity in a plant following an exposure to airborne (14)CO(2) gas

This paper provides details of a dynamic compartment model for estimating the (14)C radioactivity in an agricultural plant exposed to an amount of airborne (14)CO(2) gas. The plant, in the model, is divided into two compartments, the plant body (shoot and root) and ears, to predict the radioactivity of different parts of a plant. The carbon transports from, to and between the compartments are described by the processes of a photosynthesis, respiration, and translocation. The carbon transport fluxes of these processes are determined from the growth rates of a plant, which are usually easily attained. The model predictions showed that the present model could converge to a region where the specific activity model is applicable when the elapsed exposure time was extended up to the harvest time of a plant. The (14)C activity of a plant was greatly affected by the elapsed exposure time, the developmental stages of a plant at an exposure time, and the airborne (14)C activity during an exposure. It was expected that the peak of the ears' (14)C activity appeared when the exposure time was close to the ears-maturity date. The model predictions agreed reasonably well with the measured (14)C radioactivity of the rice plants that were artificially exposed to (14)CO(2) of a high (14)C source for a short period of time in an exposure box.     

Priority screening of toxic chemicals and industry sectors in the U.S. toxics release inventory: a comparison of the life cycle impact-based and risk-based assessment tools developed by U.S. EPA

Life Cycle Impact Assessment (LCIA) and Risk Assessment (RA) employ different approaches to evaluate toxic impact potential for their own general applications. LCIA is often used to evaluate toxicity potentials for corporate environmental management and RA is often used to evaluate a risk score for environmental policy in government. This study evaluates the cancer, non-cancer, and ecotoxicity potentials and risk scores of chemicals and industry sectors in the United States on the basis of the LCIA- and RA-based tools developed by U.S. EPA, and compares the priority screening of toxic chemicals and industry sectors identified with each method to examine whether the LCIA- and RA-based results lead to the same prioritization schemes. The Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI) is applied as an LCIA-based screening approach with a focus on air and water emissions, and the Risk-Screening Environmental Indicator (RSEI) is applied in equivalent fashion as an RA-based screening approach. The U.S. Toxic Release Inventory is used as the dataset for this analysis, because of its general applicability to a comprehensive list of chemical substances and industry sectors. Overall, the TRACI and RSEI results do not agree with each other in part due to the unavailability of characterization factors and toxic scores for select substances, but primarily because of their different evaluation approaches. Therefore, TRACI and RSEI should be used together both to support a more comprehensive and robust approach to screening of chemicals for environmental management and policy and to highlight substances that are found to be of concern from both perspectives.     

Evaluating repeated patient handling injuries following the implementation of a multi-factor ergonomic intervention program among health care workers

Objective

The objective of this study was to evaluate repeated patient handling injuries following a multi-factor ergonomic intervention program among health care workers.

Methods

This was a quasi-experimental study which had an intervention group and a non-randomized control group. Data were collected from six hospitals in Saskatchewan, Canada from September 1, 2001 to December 1, 2006.

Results

A total of 1,480 individuals who had a previous injury were eligible for the study. Medium and small size hospitals in the intervention group had significantly fewer repeated injuries than in the control group. Multivariate analysis showed that the intervention group had 38.1% lower odds of having repeated injury compared to the control group, after adjusting for hospital size.

Conclusions

The work-related repeated injury after a multi-factor intervention program was reduced. The synergistic relationships between components of multi-factor intervention and applicability of injury prevention programs to different settings need to be further explored.

Impact on Industry

Implementing a multi-factor program with the right equipment and training can lower the risk of injury among health care workers.